Custom Parameters

Type	Size	Representation
`0b`	1 bit
`1b`	1 byte	bit field
`1u`	unsigned
`1s`	signed
`2b`	2 bytes	bit field
`2u`	unsigned
`2s`	signed
`4b`	4 bytes	bit field
`4u`	unsigned
`4s`	signed
`4f`	floating-point
`8b`	8 bytes	bit field
`8u`	unsigned
`8s`	signed
`8f`	floating-point

ID	Description	Type	Source
sc1	Fuel level in the tank, l	`2u`	CAN, CANLOG, DTA-CAN
sc2	Fuel level in the tank. %	`1u`	CAN, OBDII, J1708, ELM327, CANLOG, CANFMS, DTA-CAN
sc3	Total fuel consumption, l	`4f`	CAN, CANLOG, CANFMS, DTA-CAN
sc4	Engine speed, rpm	`2u`	CAN, OBDII, J1708, ELM327, CANLOG, CANFMS, DTA-CAN
sc5	Engine coolant temperature, °C	`1s`	CAN, OBDII, J1708, ELM327, CANLOG, CANFMS, DTA-CAN
sc6	Total vehicle mileage, km	`4u`	CAN, OBDII, J1708, ELM327, CANLOG, CANFMS, DTA-CAN
sc7	Axle 1 load, kg	`2u`	CAN, CANLOG, CANFMS, DTA-CAN
sc8	Axle 2 load, kg	`2u`	CAN, CANLOG, CANFMS, DTA-CAN
sc9	Axle 3 load, kg	`2u`	CAN, CANLOG, CANFMS, DTA-CAN
sc10	Axle 4 load, kg	`2u`	CAN, CANLOG, CANFMS, DTA-CAN
sc11	Axle 5 load, kg	`2u`	CAN, CANLOG, CANFMS, DTA-CAN
sc12	Accelerator pedal position, %	`1u`	CAN, OBDII, J1708, ELM327, CANLOG, CANFMS
sc13	Brake pedal position, %	`1u`	CAN, CANLOG
sc14	Engine load, %	`1u`	CAN, OBDII, J1708, ELM327, CANLOG, CANFMS
sc15	Diesel particulate filter soot load, l	`2u`	CAN, CANLOG, DTA-CAN
sc16	Diesel particulate filter soot load,%	`1u`	CAN, CANLOG, DTA-CAN
sc17	Total engine hours, h	`4u`	CAN, OBDII, J1708, ELM327, CANLOG, CANFMS
sc18	Distance until maintenance, km	`2s`	CAN, CANLOG, CANFMS
sc19	Vehicle speed, km/h	`1u`	CAN, OBDII, J1708, ELM327, CANLOG, CANFMS, DTA-CAN
sc20	Security state flags	`2b`	CAN, CANLOG
sc21	Security state flags. Ignition on	`0b`	CAN, CANLOG
sc22	Security state flags. OEM alarm armed / alarm triggered	`0b`	CAN, CANLOG
sc23	Security state flags. Vehicle locked with the OEM key fob	`0b`	CAN, CANLOG
sc24	Security state flags. Key in ignition	`0b`	CAN, CANLOG
sc25	Security state flags. Dynamic ignition on	`0b`	CAN, CANLOG
sc26	Security state flags. Front passenger door open	`0b`	CAN, CANLOG
sc27	Security state flags. Rear passenger doors open	`0b`	CAN, CANLOG
sc28	Security state flags. Clutch pedal depressed	`0b`	CAN, CANLOG
sc29	Security state flags. Driver's door open	`0b`	CAN, CANLOG
sc30	Security state flags. Passenger doors open	`0b`	CAN, CANLOG
sc31	Security state flags. Trunk open	`0b`	CAN, CANLOG
sc32	Security state flags. Hood open	`0b`	CAN, CANLOG
sc33	Security state flags. Parking brake applied	`0b`	CAN, CANLOG
sc34	Security state flags. Brake pedal depressed	`0b`	CAN, CANLOG
sc35	Security state flags. Engine running	`0b`	CAN, CANLOG
sc36	Security state flags. Webasto	`0b`	CAN, CANLOG
sc37	Security state events	`1u`	CAN
sc38	Fault controllers	`4b`	CAN, CANLOG
sc39	Fault controllers. STOP	`0b`	CAN, CANLOG
sc40	Fault controllers. Oil pressure/level	`0b`	CAN, CANLOG
sc41	Fault controllers. Refrigerant temperature/level	`0b`	CAN, CANLOG
sc42	Fault controllers. Parking brake system	`0b`	CAN, CANLOG
sc43	Fault controllers. Battery charging system	`0b`	CAN, CANLOG
sc44	Fault controllers. AIRBAG	`0b`	CAN, CANLOG
sc45	Fault controllers. ESP off	`0b`	CAN, CANLOG
sc46	Fault controllers. EPS (Electric Power Steering) indicator on	`0b`	CAN, CANLOG
sc47	Fault controllers. Check engine	`0b`	CAN, CANLOG
sc48	Fault controllers. Lighting fault	`0b`	CAN, CANLOG
sc49	Fault controllers. Low tire pressure	`0b`	CAN, CANLOG
sc50	Fault controllers. Brake pad wear	`0b`	CAN, CANLOG
sc51	Fault controllers. Warning	`0b`	CAN, CANLOG
sc52	Fault controllers. ABS (anti-lock braking system)	`0b`	CAN, CANLOG
sc53	Fault controllers. Low fuel level	`0b`	CAN, CANLOG
sc54	Fault controllers. Service due soon	`0b`	CAN, CANLOG
sc55	Fault controllers. ESP (Electronic Stability Program)	`0b`	CAN, CANLOG
sc56	Fault controllers. Glow plug indicator	`0b`	CAN, CANLOG
sc57	Fault controllers. FAP (Diesel Particulate Filter)	`0b`	CAN, CANLOG
sc58	Fault controllers. EPC (Electronic Power Control)	`0b`	CAN, CANLOG
sc59	Fault controllers. Parking lights	`0b`	CAN, CANLOG
sc60	Fault controllers. Low beam	`0b`	CAN, CANLOG
sc61	Fault controllers. High beam	`0b`	CAN, CANLOG
sc62	Fault controllers. Hazard lights on	`0b`	CAN, CANLOG
sc63	Fault controllers. Ready to drive	`0b`	CAN, CANLOG
sc64	Fault controllers. Cruise control	`0b`	CAN, CANLOG
sc65	Fault controllers. Automatic retarder	`0b`	CAN, CANLOG
sc66	Fault controllers. Manual retarder	`0b`	CAN, CANLOG
sc67	Fault controllers. Air conditioning on	`0b`	CAN, CANLOG
sc68	Fault controllers. Bit 29 (Reserved) PTO status (Power Take-Off)	`0b`	CAN
sc69	Fault controllers. Driver seat belt	`0b`	CAN, CANLOG
sc70	Fault controllers. Passenger seat belt	`0b`	CAN, CANLOG
sc71	Fault information and indicator lamp status	`1u`	CAN
sc72	Fault information and indicator lamp status. Malfunction indicator lamp (MIL) on	`0b`	CAN
sc73	Fault information and indicator lamp status. Red STOP lamp on	`0b`	CAN
sc74	Fault information and indicator lamp status. Yellow warning lamp on	`0b`	CAN
sc75	Fault information and indicator lamp status. Protection lamp on	`0b`	CAN
sc76	Fault information and indicator lamp status. Malfunction indicator lamp (MIL) flashing	`0b`	CAN
sc77	Fault information and indicator lamp status. Red STOP lamp flashing	`0b`	CAN
sc78	Fault information and indicator lamp status. Yellow warning lamp flashing	`0b`	CAN
sc79	Fault information and indicator lamp status. Protection lamp flashing	`0b`	CAN
sc80	Fault information and indicator lamp status. Diagnostic Trouble Code (DTC)	`4u`	CAN

sc81	Fuel Level Sensor DUT-E No.1. Fuel level	`2u`	CAN
sc82	Fuel Level Sensor DUT-E No.2. Fuel level	`2u`	CAN
sc83	Fuel Level Sensor DUT-E No.3. Fuel level	`2u`	CAN
sc84	Fuel Level Sensor DUT-E No.4. Fuel level	`2u`	CAN
sc85	Fuel Level Sensor DUT-E No.5. Fuel level	`2u`	CAN
sc86	Fuel Level Sensor DUT-E No.6. Fuel level	`2u`	CAN
sc87	Fuel Level Sensor DUT-E No.7. Fuel level	`2u`	CAN
sc88	Fuel Level Sensor DUT-E No.8. Fuel level	`2u`	CAN
sc89	Flow Meter DFM. Engine operating mode based on fuel flow	???	CAN
sc90	Flow Meter DFM. Power status	???	CAN
sc91	Flow Meter DFM. Fault information	`4u`	CAN
sc92	Flow Meter DFM. Total fuel consumption	`4u`	CAN
sc93	Flow Meter DFM. Trip fuel consumption	`4u`	CAN
sc94	Flow Meter DFM. Current flow rate	`2s`	CAN
sc95	Flow Meter DFM. Supply chamber operating mode	???	CAN
sc96	Flow Meter DFM. Total fuel volume through the supply chamber	`4u`	CAN
sc97	Flow Meter DFM. Current supply chamber flow rate	`2s`	CAN
sc98	Flow Meter DFM. Supply chamber temperature	`2s`	CAN
sc99	Flow Meter DFM. Return chamber operating mode	???	CAN
sc100	Flow Meter DFM. Total fuel volume through the return chamber	`4u`	CAN
sc101	Flow Meter DFM. Current return chamber flow rate	`2s`	CAN
sc102	Flow Meter DFM. Return chamber temperature	`2s`	CAN

ID	Description	Type	Source	Note
ac1	Security state flags 2	`2u`	CAN, CANLOG
ac2	Security state flags 2. Additional engine is running	`0b`	CAN, CANLOG
ac3	Security state flags 2. Engine is running with CNG (gas)	`0b`	CAN, CANLOG
ac4	Security state flags 2. Operating mode - corporate	`0b`	CAN, CANLOG
ac5	Security state flags 2. Blocking is active	`0b`	CAN, CANLOG
ac6	Security state flags 2. Rear left door is open	`0b`	CAN, CANLOG
ac7	Security state flags 2. Rear right door is open	`0b`	CAN, CANLOG
ac8	Security state flags 2. Charging cable connected	`0b`	CAN, CANLOG
ac9	Security state flags 2. Battery charging on	`0b`	CAN, CANLOG
ac10	Security state flags 2. Vehicle locked	`0b`	CAN, CANLOG
ac11	Security state flags 2. Factory alarm emulation activated	`0b`	CAN, CANLOG
ac12	Security state flags 2. CAN module is in sleep mode (SLEEP)	`0b`	CAN, CANLOG
ac13	Security state flags 2. Automatic transmission in Park	`0b`	CAN, CANLOG
ac14	Security state flags 2. Automatic transmission in Reverse	`0b`	CAN, CANLOG
ac15	Security state flags 2. Automatic transmission in Neutral	`0b`	CAN, CANLOG
ac16	Security state flags 2. Automatic transmission in Drive	`0b`	CAN, CANLOG
ac17	Security state flags 2. Bit 15 (reserved)	`0b`	CAN, CANLOG
ac18	State flags 2	`2u`	CAN, CANLOG
ac19	State flags 2. Rear fog lights are on	`0b`	CAN, CANLOG
ac20	State flags 2. Front fog lights are on	`0b`	CAN, CANLOG
ac21	State flags 2. Additional front lighting is on	`0b`	CAN, CANLOG
ac22	State flags 2. Additional rear lighting is on	`0b`	CAN, CANLOG
ac23	State flags 2. Signal lights are on	`0b`	CAN, CANLOG
ac24	State flags 2. Rear left passenger seat belt is fastened	`0b`	CAN, CANLOG
ac25	State flags 2. Rear right passenger seat belt is fastened	`0b`	CAN, CANLOG
ac26	State flags 2. Rear center passenger seat belt is fastened	`0b`	CAN, CANLOG
ac27	State flags 2. Front passenger present	`0b`	CAN, CANLOG
ac28	Status flags 2. Left turn signal on	`0b`	CAN, CANLOG
ac29	Status flags 2. Right turn signal on	`0b`	CAN, CANLOG
ac30	Status flags 2. Bit 11 (reserved)	`0b`	CAN, CANLOG
ac31	Status flags 2. Bit 12 (reserved)	`0b`	CAN, CANLOG
ac32	Status flags 2. Bit 13 (reserved)	`0b`	CAN, CANLOG
ac33	Status flags 2. Bit 14 (reserved)	`0b`	CAN, CANLOG
ac34	Status flags 2. Bit 15 (reserved)	`0b`	CAN, CANLOG
ac35	Agricultural machinery state flags 0	`2u`	CAN, CANLOG
ac36	Agricultural machinery state flags 0. Operator absent	`0b`	CAN, CANLOG
ac37	Agricultural machinery state flags 0. Engine oil filter blockage indicator is on	`0b`	CAN, CANLOG
ac38	Agricultural machinery state flags 0. Low engine oil pressure indicator is on	`0b`	CAN, CANLOG
ac39	Agricultural machinery state flags 0. Excessive engine oil temperature indicator on	`0b`	CAN, CANLOG
ac40	Agricultural machinery state flags 0. Low coolant level indicator on	`0b`	CAN, CANLOG
ac41	Agricultural machinery state flags 0. Hydraulic oil filter blockage indicator is on	`0b`	CAN, CANLOG
ac42	Agricultural machinery state flags 0. Low hydraulic oil pressure indicator is on	`0b`	CAN, CANLOG
ac43	Agricultural machinery state flags 0. Low hydraulic oil level indicator is on	`0b`	CAN, CANLOG
ac44	Agricultural machinery state flags 0. High hydraulic temperature Indicator is on	`0b`	CAN, CANLOG
ac45	Agricultural machinery state flags 0. Hydraulic oil overflow indicator is on	`0b`	CAN, CANLOG
ac46	Agricultural machinery state flags 0. Air filter blockage indicator is on	`0b`	CAN, CANLOG
ac47	Agricultural machinery state flags 0. Fuel filter blockage indicator is on	`0b`	CAN, CANLOG
ac48	Agricultural machinery state flags 0. Water-in-fuel indicator is on	`0b`	CAN, CANLOG
ac49	Agricultural machinery state flags 0. Brake filter blockage indicator is on	`0b`	CAN, CANLOG
ac50	Status flags of agricultural machinery 0. Bit 14 (reserved)	`0b`	CAN, CANLOG
ac51	Status flags of agricultural machinery 0. Bit 14 (reserved)	`0b`	CAN, CANLOG
ac52	Agricultural machinery state flags 1	`1u`	CAN, CANLOG
ac53	Agricultural machinery state flags 1. Right joystick to the right active	`0b`	CAN, CANLOG
ac54	Agricultural machinery state flags 1. Right joystick to the left active	`0b`	CAN, CANLOG
ac55	Agricultural machinery state flags 1. Right joystick forward active	`0b`	CAN, CANLOG
ac56	Agricultural machinery state flags 1. Right joystick back active	`0b`	CAN, CANLOG
ac57	Agricultural machinery state flags 1. Left joystick to the right active	`0b`	CAN, CANLOG
ac58	Agricultural machinery state flags 1. Left joystick to the left active	`0b`	CAN, CANLOG
ac59	Agricultural machinery state flags 1. Left joystick forward active	`0b`	CAN, CANLOG
ac60	Agricultural machinery state flags 1. Left joystick back active	`0b`	CAN, CANLOG
ac61	Agricultural machinery state flags 2	`1u`	CAN, CANLOG
ac62	Agricultural machinery state flags 2. First rear hydraulic drive is on	`0b`	CAN, CANLOG
ac63	Agricultural machinery state flags 2. Second rear hydraulic drive is on	`0b`	CAN, CANLOG
ac64	Agricultural machinery state flags 2. Third rear hydraulic drive is on	`0b`	CAN, CANLOG
ac65	Agricultural machinery state flags 2. Fourth rear hydraulic drive is on	`0b`	CAN, CANLOG
ac66	Agricultural machinery state flags 2. First front hydraulic drive is on	`0b`	CAN, CANLOG
ac67	Agricultural machinery state flags 2. Second front hydraulic drive is on	`0b`	CAN, CANLOG
ac68	Agricultural machinery state flags 2. Third front hydraulic drive is on	`0b`	CAN, CANLOG
ac69	Agricultural machinery state flags 2. Fourth front hydraulic drive is on	`0b`	CAN, CANLOG
ac70	Agricultural machinery state flags 3	`1u`	CAN, CANLOG
ac71	Agricultural machinery state flags 3. Front three-point linkage is on	`0b`	CAN, CANLOG
ac72	Agricultural machinery state flags 3. Rear three-point linkage is on	`0b`	CAN, CANLOG
ac73	Agricultural machinery state flags 3. Front power takeoff is on	`0b`	CAN, CANLOG
ac74	Agricultural machinery state flags 3. Rear power takeoff is on	`0b`	CAN, CANLOG
ac75	Agricultural machinery state flags 3. Mowing in progress	`0b`	CAN, CANLOG
ac76	Agricultural machinery state flags 3. Threshing in progress	`0b`	CAN, CANLOG
ac77	Agricultural machinery state flags 3. Unloading grain from the hopper is on	`0b`	CAN, CANLOG
ac78	Status flags of agricultural machinery 3. Bit 7 (reserved)	`0b`	CAN, CANLOG
ac79	Agricultural machinery state flags 4	`1u`	CAN, CANLOG
ac80	Agricultural machinery state flags 4. Grain tank is 100% full	`0b`	CAN, CANLOG
ac81	Agricultural machinery state flags 4. Grain tank is 70% full	`0b`	CAN, CANLOG
ac82	Agricultural machinery state flags 4. Grain tank is open	`0b`	CAN, CANLOG
ac83	Agricultural machinery state flags 4. Unloading drive on with the unloading tube folded	`0b`	CAN, CANLOG
ac84	Agricultural machinery state flags 4. Cleaning fan control is off	`0b`	CAN, CANLOG
ac85	Agricultural machinery state flags 4. Threshing drum control is off	`0b`	CAN, CANLOG
ac86	Agricultural machinery state flags 4. The straw-walker is clogged	`0b`	CAN, CANLOG
ac87	Agricultural machinery state flags 4. Excessive threshing drum clearance	`0b`	CAN, CANLOG
ac88	Municipal vehicles' state flags 1	`1u`	CAN, CANLOG
ac89	Municipal vehicles' state flags 1. Salt (sand) spreader on	`0b`	CAN, CANLOG
ac90	Municipal vehicles' state flags 1. Deicing agent spraying on	`0b`	CAN, CANLOG
ac91	Municipal vehicles' state flags 1. Conveyor belt is on	`0b`	CAN, CANLOG
ac92	Municipal vehicles' state flags 1. Salt spreader drive wheel is on	`0b`	CAN, CANLOG
ac93	Municipal vehicles' state flags 1. Brushes are on	`0b`	CAN, CANLOG
ac94	Municipal vehicles' state flags 1. Vacuum cleaner is on	`0b`	CAN, CANLOG
ac95	Municipal vehicles' state flags 1. Water supply is on	`0b`	CAN, CANLOG
ac96	Municipal vehicles' state flags 1. High pressure washer (Karcher) is on	`0b`	CAN, CANLOG
ac97	Municipal vehicles' state flags 2	`1u`	CAN, CANLOG
ac98	Municipal vehicles' state flags 2. Liquid feed pump is on	`0b`	CAN, CANLOG
ac99	Municipal vehicles' state flags 2. Hopper unloading is on	`0b`	CAN, CANLOG
ac100	Municipal vehicles' state flags 2. Low tank salt (sand) level indicator is on	`0b`	CAN, CANLOG
ac101	Municipal vehicles' state flags 2. Low tank water level indicator is on	`0b`	CAN, CANLOG
ac102	Municipal vehicles' state flags 2. Reagent use is on	`0b`	CAN, CANLOG
ac103	Municipal vehicles' state flags 2. Compressor is on	`0b`	CAN, CANLOG
ac104	Municipal vehicles' state flags 2. Water valve is open	`0b`	CAN, CANLOG
ac105	Status flags of municipal vehicles 2. Bit 7 (reserved)	`0b`	CAN, CANLOG
ac106	Municipal vehicles' state flags 3	`1u`	CAN, CANLOG
ac107	Municipal vehicles' state flags 3. Cab raised	`0b`	CAN, CANLOG
ac108	Municipal vehicles' state flags 3. Cab lowered	`0b`	CAN, CANLOG
ac109	Status flags of municipal vehicles 3. Bit 2 (reserved)	`0b`	CAN, CANLOG
ac110	Status flags of municipal vehicles 3. Bit 3 (reserved)	`0b`	CAN, CANLOG
ac111	Status flags of municipal vehicles 3. Bit 4 (reserved)	`0b`	CAN, CANLOG
ac112	Status flags of municipal vehicles 3. Bit 5 (reserved)	`0b`	CAN, CANLOG
ac113	Status flags of municipal vehicles 3. Bit 6 (reserved)	`0b`	CAN, CANLOG
ac114	Status flags of municipal vehicles 3. Bit 7 (reserved)	`0b`	CAN, CANLOG
ac115	State flags for tanks 1	`1u`	CAN, CANLOG
ac116	State flags for tanks 1. Section 1 - liquid is present in the branch pipe	`0b`	CAN, CANLOG
ac117	State flags for tanks 1. Section 1 - filled	`0b`	CAN, CANLOG
ac118	State flags for tanks 1. Section 1 - overfilled	`0b`	CAN, CANLOG
ac119	Status flags for tanks 1. Bit 3 (reserved)	`0b`	CAN, CANLOG
ac120	State flags for tanks 1. Section 2 - liquid is present in the branch pipe	`0b`	CAN, CANLOG
ac121	State flags for tanks 1. Section 2 - filled	`0b`	CAN, CANLOG
ac122	State flags for tanks 1. Section 2 - overfilled	`0b`	CAN, CANLOG
ac123	Status flags for tanks 1. Bit 7 (reserved)	`0b`	CAN, CANLOG
ac124	State flags for tanks 2	`1u`	CAN, CANLOG
ac125	State flags for tanks 2. Section 3 - liquid is present in the drain pipe	`0b`	CAN, CANLOG
ac126	State flags for tanks 2. Section 3 - filled	`0b`	CAN, CANLOG
ac127	State flags for tanks 2. Section 3 - overfilled	`0b`	CAN, CANLOG
ac128	Status flags for tanks 2. Section 3 (reserved)	`0b`	CAN, CANLOG
ac129	State flags for tanks 2. Section 4 - liquid is present in the drain pipe	`0b`	CAN, CANLOG
ac130	State flags for tanks 2. Section 4 - filled	`0b`	CAN, CANLOG
ac131	State flags for tanks 2. Section 4 - overfilled	`0b`	CAN, CANLOG
ac132	Status flags for tanks 2. Bit 7 (reserved)	`0b`	CAN, CANLOG
ac133	State flags for tanks 3	`1u`	CAN, CANLOG
ac134	State flags for tanks 3. Section 5 - liquid is present in the drain pipe	`0b`	CAN, CANLOG
ac135	State flags for tanks 3. Section 5 - filled	`0b`	CAN, CANLOG
ac136	State flags for tanks 3. Section 5 - overfilled	`0b`	CAN, CANLOG
ac137	Status flags for tanks 3. Bit 3 (reserved)	`0b`	CAN, CANLOG
ac138	State flags for tanks 3. Section 6 - liquid is present in the drain pipe	`0b`	CAN, CANLOG
ac139	State flags for tanks 3. Section 6 - filled	`0b`	CAN, CANLOG
ac140	State flags for tanks 3. Section 6 - overfilled	`0b`	CAN, CANLOG
ac141	Status flags for tanks 3. Bit 7 (reserved)	`0b`	CAN, CANLOG
ac142	State flags for tanks 4	`1u`	CAN, CANLOG
ac143	State flags for tanks 4. Section 7 - liquid is present in the drain pipe	`0b`	CAN, CANLOG
ac144	State flags for tanks 4. Section 7 - filled	`0b`	CAN, CANLOG
ac145	State flags for tanks 4. Section 7 - overfilled	`0b`	CAN, CANLOG
ac146	Status flags for tanks 4. Bit 3 (reserved)	`0b`	CAN, CANLOG
ac147	State flags for tanks 4. Section 8 - liquid is present in the drain pipe	`0b`	CAN, CANLOG
ac148	State flags for tanks 4. Section 8 - filled	`0b`	CAN, CANLOG
ac149	State flags for tanks 4. Section 8 - overfilled	`0b`	CAN, CANLOG
ac150	Status flags for tanks 4. Bit 4 (reserved)	`0b`	CAN, CANLOG
ac151	instantaneous fuel consumption, 0.05 l/h	`2u`	CAN, OBDII, J1708, ELM327, CANLOG
ac152	Harvesting time, sec	`4u`	CAN, CANLOG
ac153	Harvested area, 1/10000 ha	`4u`	CAN, CANLOG
ac154	Field capacity, 1/100000 ha/h	`4u`	CAN, CANLOG
ac155	The amount of harvested grain, kg	`4u`	CAN, CANLOG
ac156	Grain moisture, 0.1%	`2u`	CAN, CANLOG
ac157	Threshing drum speed, rpm	`2u`	CAN, CANLOG
ac158	Concave clearance, mm	`1u`	CAN, CANLOG
ac159	Retarder load, %	`1s`	CAN, CANLOG
ac160	Service: Distance past maintenance threshold, ×5 km	`2u`	CAN, CANLOG
ac161	Service: Distance since maintenance, ×5 km	`2u`	CAN, CANLOG
ac162	Service: Time until scheduled maintenance, days	`2u`	CAN, CANLOG
ac163	Service: Maintenance overdue by, days	`2u`	CAN, CANLOG
ac164	Service: Time since maintenance, days	`2u`	CAN, CANLOG
ac165	Battery temperature, °C	`1s`	CAN, CANLOG
ac166	Battery charge level, 0.01%	`2u`	CAN, CANLOG
ac167	Hoist boom tilt, 0.1°	`2s`	CAN, CANLOG
ac168	Hoist boom swing, 0.1°	`2s`	CAN, CANLOG
ac169	Extended boom length, 0.1 m	`2u`	CAN, CANLOG
ac170	Distance between boom and hoisting mechanism 0.1 m	`2u`	CAN, CANLOG
ac171	Hoist boom height above the ground, 0.1 m	`2u`	CAN, CANLOG
ac172	Water level in the fire extinguishing tank, 0.1%	`2u`	CAN, CANLOG
ac173	Foam level in the fire extinguishing tank, 0.1%	`2u`	CAN, CANLOG
ac174	Fire pump pressure, 0.1 bar	`2u`	CAN, CANLOG
ac175	Wind speed, m/s	`1u`	CAN, CANLOG
ac176	Ambient temperature, °C	`1s`	CAN, CANLOG
ac177	Drill speed, rpm	`2u`	CAN, CANLOG
ac178	Amount of salt/sand scattered per square meter, 0.01 g/m2	`2u`	CAN, CANLOG
ac179	Battery voltage, 0.1 V	`2u`	CAN, CANLOG
ac180	Amount of fine-grain salt spread, 0.1 tonnes	`4u`	CAN, CANLOG
ac181	Amount of coarse salt spread, 0.1 tonnes	`4u`	CAN, CANLOG
ac182	Amount of DiMix mixture spread, 0.1 tonnes	`4u`	CAN, CANLOG
ac183	Amount of coarse-grained calcium scattered, 0.1 m3	`4u`	CAN, CANLOG
ac184	Amount of calcium chloride scattered 0.1 m3	`4u`	CAN, CANLOG
ac185	Amount of sodium chloride scattered 0.1 m3	`4u`	CAN, CANLOG
ac186	Amount of magnesium chloride scattered 0.1 m3	`4u`	CAN, CANLOG
ac187	Amount of gravel spread, 0.1 tonnes	`4u`	CAN, CANLOG
ac188	Amount of sand spread, 0.1 tonnes	`4u`	CAN, CANLOG
ac189	Left spraying width, 0.01 m	`2u`	CAN, CANLOG
ac190	Right spreading width, 0.01 m	`2u`	CAN, CANLOG
ac191	Spreader operating time, s	`4u`	CAN, CANLOG
ac192	Distance traveled while spreading, 0.005 km	`4u`	CAN, CANLOG
ac193	Load weight, kg	`4u`	CAN, CANLOG
ac194	Total CNG consumption, 0.5 kg	`4u`	CAN, CANLOG	from 0 to 2147483647.0 kgin increments of 0.5 kg0xFFFFFFFF - no data
ac195	CNG level, 0.1%	`2u`	CAN, CANLOG	from 0 to 100 % in increments of 0.01 %0xFFFF - no data
ac196	CNG level, 0.1 kg	`2u`	CAN, CANLOG	from 0 to 6553.4 kg in increments of 0.1 kg0xFFFF - no data
ac197	Cruising range, 0.005 km	`4u`	CAN, CANLOG
ac198	Electric driving range, 0.005 km	`4u`	CAN, CANLOG
ac199	Cruising range with additional fuel, 0.005 km	`4u`	CAN, CANLOG
ac200	Driver 1. Time of continuous driving, min	`2u`	CAN, CANLOG
ac201	Driver 1. Total break time, min	`2u`	CAN, CANLOG
ac202	Driver 1. Duration of the selected activity, min	`2u`	CAN, CANLOG
ac203	Driver 1. Total driving time for the previous and current week, min	`2u`	CAN, CANLOG
ac204	Driver 2. Time of continuous driving, min	`2u`	CAN, CANLOG
ac205	Driver 2. Total break time, min	`2u`	CAN, CANLOG
ac206	Driver 2. Duration of the selected activity, min	`2u`	CAN, CANLOG
ac207	Driver 2. Total driving time for the previous and current week, min	`2u`	CAN, CANLOG
ac208	Total vehicle weight, kg	`4u`	CAN, CANLOG
ac209	Total fuel consumption, 0.05 l	`4u`	CAN, CANLOG
ac210	Total vehicle mileage, 0.005 km	`4u`	CAN, CANLOG
ac211	Trip distance, 0.005 km	`4u`	CAN, CANLOG
ac212	Total cruise control time, s	`4u`	CAN, CANLOG
ac213	Steering wheel angle, 1/1024 rad	`2s`	CAN, CANLOG

ac214	CAN status	`2b`	SYSTEM
ac215	CAN bus 1 is on	`0b`	SYSTEM
ac216	CAN bus 2 is on	`0b`	SYSTEM
ac217	CAN bus 1 is receiving messages	`0b`	SYSTEM
ac218	CAN bus 2 is receiving messages	`0b`	SYSTEM
ac219	Active bus: 0 - engine, 1 - comfort (for devices with one physical CAN bus)	`0b`	SYSTEM
ac220	Spare (second bit of the "Active bus" field?)	`0b`	SYSTEM
ac221	CAN bus 3 is on	`0b`	SYSTEM
ac222	CAN bus 3 is receiving messages	`0b`	SYSTEM
ac223	Engine running time is calculated by the device according to the engine running flag	`0b`	SYSTEM
ac224	Mileage of the vehicle is calculated by the device according to the speed	`0b`	SYSTEM
ac225	Total fuel consumption is calculated by the device from the instantaneous consumption	`0b`	SYSTEM
ac226	Information about all doors available (otherwise only common SID30/SID27 bits)	`0b`	SYSTEM
ac227	Total weight of the vehicle is calculated from the load on axles 1...5	`0b`	SYSTEM
ac228	J1708 bus is receiving messages	`0b`	SYSTEM
ac229	RS-232/RS-485 external adapter is receiving messages	`0b`	SYSTEM
ac230	Bluetooth external adapter is receiving messages	`0b`	SYSTEM

ac231	Gas injection time, 0.1 ms	`1u`	CAN	from 0 to 25,4 ms in increments of 0.1 ms0xFF -no data
ac232	Turbo boost pressure, 0.01 bar	`2u`	CAN	from 0 to 655.34 bar in increments of 0.01 bar0xFFFF - no data
ac233	Gas pressure in the injector rail, 0.01 bar	`2u`	CAN	from 0 to 655.34 bar in increments 0.01 bar0xFFFF - no data
ac234	Gas temperature in the injector rail, 0.1 °C	`2s`	CAN	from -273,2 to 3276,7 °C in increments of 0.1 °C0x8000 - no data
ac235	Exhaust Gas Temperature (EGT), 0.1 °C	`2s`	CAN	from -273,2 to 3276,7 °C in increments of 0.1 °C0x8000 - no data
ac236	Running time with diesel fuel, s	`4u`	CAN	from 0 to 4294967294 in increments of 1 s0xFFFFFFFF - no data
ac237	Running time with mixed fuel, s	`4u`	CAN	from 0 to 4294967294 in increments of 1 s0xFFFFFFFF - no data
ac238	Gas pressure regulator temperature, 0.1 °C	`2s`	CAN	from -273,2 to 3276,7 °C in increments of 0.1 °C0x8000 - no data
ac239	CNG fuel consumption per trip, 0.5 kg	`4u`	CAN	from 0 to 2147483647.0 kgin increments of 0.5 kg0xFFFFFFFF - no data
ac240	CNG pressure, 0.01 bar	`2u`	CAN, CANLOG	from 0 to 655.34 bar in increments of 0.01 bar0xFFFF - no data

ac241	Instant gas consumption, 0.1 kg/h	`1u`	CAN	from 0 to 25,4 kg/h in increments of 0.1
ac242	Diesel card	`1u`	CAN	from 0 to 255
ac243	Trailer axle 1 load, kg	`2u`	CAN, CANLOG	from 0 to 3276,7 kg1bit for 0.5kg
ac244	Trailer axle 2 load, kg	`2u`	CAN, CANLOG	from 0 to 3276,7 kg1bit for 0.5kg
ac245	Trailer axle 3 load, kg	`2u`	CAN, CANLOG	from 0 to 3276,7 kg1bit for 0.5kg
ac246	Trailer axle 4 load, kg	`2u`	CAN, CANLOG	from 0 to 3276,7 kg1bit for 0.5kg
ac247	Total trailer axle load, kg	`2u`	CAN, CANLOG	from 0 to 131068 kg1bit for 2kg
ac248	Fuel level in tank 2, 0.1 l	`2u`	CAN	from 0 to 6553.4 l accurate to 0.1l
ac249	Fuel level in tank 2, %	`2u`	CAN	from 0 to 100% accurate to 0.1%
ac250	Actual engine torque, %	`1s`	CAN	-125% to 125%
ac251	Instant fuel economy, 1/512 km/l	`2u`	CAN	from 0 to 125.5 km/l1/512 km/l for bit
ac252	High resolution total fuel used, 0.001 L	`4u`	CAN
ac253	High resolution total vehicle distance, 5 m	`4u`	CAN
ac254	Selected gear	`1s`	CAN
ac255	Current gear	`1s`	CAN

ID	Description	Type	Source	Note
bc1	Cruise control status	`1u`	CAN	0 - Off1 – Hold2 – Accelerate3 – Decelerate4 – Resume5 – Set6 – Accel. Override7 - Not available
bc2	Retarder torque mode	`1u`	CAN	00 - FF(see description)
bc3	Fuel Type	`1u`	CAN	256 statuses.(see description)
bc4	Brake System Air Pressure 1, kPa	`2u`	CAN	0 to 2000 kPa
bc5	Brake System Air Pressure 2, kPa	`2u`	CAN	0 to 2000 kPa
bc6	Engine Oil Pressure, kPa	`2u`	CAN	0 to 1000 kPa
bc7	Transmission Oil Pressure, kPa	`2u`	CAN	0 to 1000 kPa
bc8	Engine Oil Temperature, 0.1 °C	`2s`	CAN	from -273.2 to 3276.7 °C
bc9	Transmission Oil Temperature, 0.1 °C	`2s`	CAN	from -273.2 to 3276.7 °C
bc10	Engine Oil Level, %	`1u`	CAN	0 to 100 %
bc11	Engine Oil Level, L	`2u`	CAN	0 to 100.0 L
bc12	Transmission Oil Level, %	`1u`	CAN
bc13	Transmission Oil Level, L	`2u`	CAN	0 to 100.0 L
bc14	Seeding Rate, kg/ha	`4u`	CAN	0 to 4094 kg/ha
bc15	Dry Fertilizer Application Rate, kg/ha	`4u`	CAN	0 to 4094 kg/ha
bc16	Liquid Fertilizer Application Rate, L/ha	`4u`	CAN	0 to 4094 L/ha
bc17	Coulter number	`1u`	CAN	0 to 254
bc18	Column number	`1u`	CAN	0 to 254
bc19	Equipment Lifting Height, 0.01 m	`2u`	CAN	0 to 655.30 m
bc20	Agricultural machinery state flags 5	`1b`	CAN
bc21	Agricultural machinery state flags 5. Equipment raised	`0b`	CAN
bc22	Agricultural machinery state flags 5. Equipment in middle position	`0b`	CAN
bc23	Agricultural machinery state flags 5. Equipment lowered	`0b`	CAN
bc24	Agricultural machinery state flags 5. Equipment folded	`0b`	CAN
bc25	Agricultural machinery state flags 5. Equipment unfolded	`0b`	CAN
bc26	Agricultural machinery state flags 5. Error. Coulter clogged	`0b`	CAN
bc27	Agricultural machinery state flags 5. Error. Coulter sensor not working	`0b`	CAN
bc28	Agricultural machinery state flags 5. Bit 8 - reserved	`0b`	CAN

bc29	Test flags 1	`2b`	CAN
bc30	Test flags 1. Bit 1	`0b`	CAN
bc31	Test flags 1. Bit 2	`0b`	CAN
bc32	Test flags 1. Bit 3	`0b`	CAN
bc33	Test flags 1. Bit 4	`0b`	CAN
bc34	Test flags 1. Bit 5	`0b`	CAN
bc35	Test flags 1. Bit 6	`0b`	CAN
bc36	Test flags 1. Bit 7	`0b`	CAN
bc37	Test flags 1. Bit 8	`0b`	CAN
bc38	Test flags 1. Bit 9	`0b`	CAN
bc39	Test flags 1. Bit 10	`0b`	CAN
bc40	Test flags 1. Bit 11	`0b`	CAN
bc41	Test flags 1. Bit 12	`0b`	CAN
bc42	Test flags 1. Bit 13	`0b`	CAN
bc43	Test flags 1. Bit 14	`0b`	CAN
bc44	Test flags 1. Bit 15	`0b`	CAN
bc45	Test flags 1. Bit 16	`0b`	CAN
bc46	Test flags 2	`2b`	CAN
bc47	Test flags 2. Bit 1	`0b`	CAN
bc48	Test flags 2. Bit 2	`0b`	CAN
bc49	Test flags 2. Bit 3	`0b`	CAN
bc50	Test flags 2. Bit 4	`0b`	CAN
bc51	Test flags 2. Bit 5	`0b`	CAN
bc52	Test flags 2. Bit 6	`0b`	CAN
bc53	Test flags 2. Bit 7	`0b`	CAN
bc54	Test flags 2. Bit 8	`0b`	CAN
bc55	Test flags 2. Bit 9	`0b`	CAN
bc56	Test flags 2. Bit 10	`0b`	CAN
bc57	Test flags 2. Bit 11	`0b`	CAN
bc58	Test flags 2. Bit 12	`0b`	CAN
bc59	Test flags 2. Bit 13	`0b`	CAN
bc60	Test flags 2. Bit 14	`0b`	CAN
bc61	Test flags 2. Bit 15	`0b`	CAN
bc62	Test flags 2. Bit 16	`0b`	CAN
bc63	1-Byte Test Parameter No. 1	`1u`	CAN
bc64	1-Byte Test Parameter No. 2	`1u`	CAN
bc65	1-Byte Test Parameter No. 3	`1u`	CAN
bc66	1-Byte Test Parameter No. 4	`1u`	CAN
bc67	1-Byte Test Parameter No. 5	`1u`	CAN
bc68	2-Byte Test Parameter No. 1	`2u`	CAN
bc69	2-Byte Test Parameter No. 2	`2u`	CAN
bc70	2-Byte Test Parameter No. 3	`2u`	CAN
bc71	2-Byte Test Parameter No. 4	`2u`	CAN
bc72	2-Byte Test Parameter No. 5	`2u`	CAN
bc73	4-Byte Test Parameter No. 1	`4u`	CAN
bc74	4-Byte Test Parameter No. 2	`4u`	CAN
bc75	4-Byte Test Parameter No. 3	`4u`	CAN
bc76	4-Byte Test Parameter No. 4	`4u`	CAN
bc77	4-Byte Test Parameter No. 5	`4u`	CAN
bc78	4-byte Float test parameter No. 1	`4f`	CAN
bc79	4-byte Float test parameter No. 2	`4f`	CAN
bc80	4-byte Float test parameter No. 3	`4f`	CAN
bc81	4-byte Float test parameter No. 4	`4f`	CAN
bc82	4-byte Float test parameter No. 5	`4f`	CAN
bc83	4-byte Float test parameter No. 6	`4f`	CAN
bc84	4-byte Float test parameter No. 7	`4f`	CAN
bc85	4-byte Float test parameter No. 8	`4f`	CAN
bc86	4-byte Float test parameter No. 9	`4f`	CAN
bc87	4-byte Float test parameter No. 10	`4f`	CAN
bc88	4-byte Float test parameter No. 11	`4f`	CAN
bc89	4-byte Float test parameter No. 12	`4f`	CAN
bc90	4-byte Float test parameter No. 13	`4f`	CAN
bc91	4-byte Float test parameter No. 14	`4f`	CAN
bc92	4-byte Float test parameter No. 15	`4f`	CAN

ID	Description	Type	Source	Note
uc1 uc2 ... uc31 uc32	CAN custom parameters No. 1 ... 32;	any	CAN	The parameter type and size depend on the configuration

ID	Description	Type	Source	Note
mb1 mb2 ... mb31 mb32	MODBUS custom parameters No. 1 ... 32;	any	MODBUS	The parameter type and size depend on the configuration

ID	Description	Type	Source	Note
ce1 ce2 ... ce31 ce32	Complex Events custom parameters No. 1 ... 32;	any	COMPLEX_EVENTS	The parameter type and size depend on the script implementation

ID	Description	Type	Source	Note
up1 up2 ... up31 up32	Bluetooth custom parameters No. 1 ... 32;	any	BLUETOOTH	The parameter type and size depend on the configuration

ID	Description	Type	Source
as1	Tilt angle sensor No. 1, 0…180 degrees	`2s`	ADM32, ESCORT DU, GNOM DP, MECH_DDS
as2	Tilt angle sensor No. 2, 0…180 degrees	`2s`	ADM32, ESCORT DU, GNOM DP, MECH_DDS
as3	Tilt angle sensor No. 3, 0…180 degrees	`2s`	ADM32, ESCORT DU, GNOM DP, MECH_DDS
as4	Tilt angle sensor No. 4, 0…180 degrees	`2s`	ADM32, ESCORT DU, GNOM DP, MECH_DDS

as5	Tilt angle sensor: axis X No. 1, -90…90 degrees	`2s`	MECHATRONICS DEGREE, TELTONIKA_EYE
as6	Tilt angle sensor: axis X No. 2, -90…90 degrees	`2s`	MECHATRONICS DEGREE, TELTONIKA_EYE
as7	Tilt angle sensor: axis X No. 3, -90…90 degrees	`2s`	MECHATRONICS DEGREE, TELTONIKA_EYE
as8	Tilt angle sensor: axis X No. 4, -90…90 degrees	`2s`	MECHATRONICS DEGREE, TELTONIKA_EYE

as9	Tilt angle sensor: axis Y No. 1, -90…90 degrees (-180…180 degrees)	`2s`	MECHATRONICS DEGREE, TELTONIKA_EYE
as10	Tilt angle sensor: axis Y No. 2, -90…90 degrees (-180…180 degrees)	`2s`	MECHATRONICS DEGREE, TELTONIKA_EYE
as11	Tilt angle sensor: axis Y No. 3, -90…90 degrees (-180…180 degrees)	`2s`	MECHATRONICS DEGREE, TELTONIKA_EYE
as12	Tilt angle sensor: axis Y No. 4, -90…90 degrees (-180…180 degrees)	`2s`	MECHATRONICS DEGREE, TELTONIKA_EYE

as13	Tilt angle sensor: axis Z No. 1, -90…90 degrees	`2s`	MECHATRONICS DEGREE
as14	Tilt angle sensor: axis Z No. 2, -90…90 degrees	`2s`	MECHATRONICS DEGREE
as15	Tilt angle sensor: axis Z No. 3, -90…90 degrees	`2s`	MECHATRONICS DEGREE
as16	Tilt angle sensor: axis Z No. 4, -90…90 degrees	`2s`	MECHATRONICS DEGREE

ID	Description	Type	Source
ls1	Illumination in Lux No. 1, 0.01 lx	`4u`	ADM31, ESCORT TL, TESLiOT, MECH_DTS
ls2	Illumination in Lux No. 2, 0.01 lx	`4u`	ADM31, ESCORT TL, TESLiOT, MECH_DTS
ls3	Illumination in Lux No. 3, 0.01 lx	`4u`	ADM31, ESCORT TL, TESLiOT, MECH_DTS
ls4	Illumination in Lux No. 4, 0.01 lx	`4u`	ADM31, ESCORT TL, TESLiOT, MECH_DTS

ID	Description	Type	Source
ub1	Battery voltage of sensor No. 1, 0.1 V	`1u`	ADM31, ADM32, DUT E, DFM, ESCORT TD, ESCORT TL, ESCORT DU, BT04, MECHATRONICS DOMINATOR, TESLiOT, TELTONIKA_EYE, ITALON, MECH_DPS, MECH_DDS, MECH_DTS
ub2	Battery voltage of sensor No. 2, 0.1 V	`1u`	ADM31, ADM32, DUT E, DFM, ESCORT TD, ESCORT TL, ESCORT DU, BT04, MECHATRONICS DOMINATOR, TESLiOT, TELTONIKA_EYE, ITALON, MECH_DPS, MECH_DDS, MECH_DTS
ub3	Battery voltage of sensor No. 3, 0.1 V	`1u`	ADM31, ADM32, DUT E, DFM, ESCORT TD, ESCORT TL, ESCORT DU, BT04, MECHATRONICS DOMINATOR, TESLiOT, TELTONIKA_EYE, ITALON, MECH_DPS, MECH_DDS, MECH_DTS
ub4	Battery voltage of sensor No. 4, 0.1 V	`1u`	ADM31, ADM32, DUT E, DFM, ESCORT TD, ESCORT TL, ESCORT DU, BT04, MECHATRONICS DOMINATOR, TESLiOT, TELTONIKA_EYE, ITALON, MECH_DPS, MECH_DDS, MECH_DTS

ID	Description	Type	Source
sl1	Signal level of sensor No. 1, dBm	`1s`	All BT sensors
sl2	Signal level of sensor No. 2, dBm	`1s`	All BT sensors
sl3	Signal level of sensor No. 3, dBm	`1s`	All BT sensors
sl4	Signal level of sensor No. 4, dBm	`1s`	All BT sensors

ID	Description	Type	Source
st1	Status of the sensor No. 1	`4u`	ADM31, ADM32, DUT E, DFM, GNOM DDE, ESCORT DU, BT04, GNOM DP, MECHATRONICS DEGREE, TESLiOT, TELTONIKA_EYE, MECH_DPS, MECH_DDS, MECH_DTS
st2	Status of the sensor No. 2	`4u`	ADM31, ADM32, DUT E, DFM, GNOM DDE, ESCORT DU, BT04, GNOM DP, MECHATRONICS DEGREE, TESLiOT, TELTONIKA_EYE, MECH_DPS, MECH_DDS, MECH_DTS
st3	Status of the sensor No. 3	`4u`	ADM31, ADM32, DUT E, DFM, GNOM DDE, ESCORT DU, BT04, GNOM DP, MECHATRONICS DEGREE, TESLiOT, TELTONIKA_EYE, MECH_DPS, MECH_DDS, MECH_DTS
st4	Status of the sensor No. 4	`4u`	ADM31, ADM32, DUT E, DFM, GNOM DDE, ESCORT DU, BT04, GNOM DP, MECHATRONICS DEGREE, TESLiOT, TELTONIKA_EYE, MECH_DPS, MECH_DDS, MECH_DTS

ID	Description	Type	Source
pr1	Pressure sensor No. 1, 0.1 kPa	`2u`	GNOM_DDE, MECH_DPS, MECH_DTS
pr2	Pressure sensor No. 2, 0.1 kPa	`2u`	GNOM_DDE, MECH_DPS, MECH_DTS
pr3	Pressure sensor No. 3, 0.1 kPa	`2u`	GNOM_DDE, MECH_DPS, MECH_DTS
pr4	Pressure sensor No. 4, 0.1 kPa	`2u`	GNOM_DDE, MECH_DPS, MECH_DTS

ID	Description	Type	Source
fs1	Total fuel consumption No. 1, 0.001 l	`4u`	DFM
fs2	Total fuel consumption No. 2, 0.001 l	`4u`	DFM
fs3	Total fuel consumption No. 3, 0.001 l	`4u`	DFM
fs4	Total fuel consumption No. 4, 0.001 l	`4u`	DFM

ID	Description	Type	Source
wt1	Operating time No. 1, s	`4u`	DFM
wt2	Operating time No. 2, s	`4u`	DFM
wt3	Operating time No. 3, s	`4u`	DFM
wt4	Operating time No. 4, s	`4u`	DFM

ID	Description	Type	Source
is1	Status of Bluetooth sensor No. 1:Bit 0 - sensor connected.Bits 1..7 - reserved	`1u`	All BT sensors
is2	Status of Bluetooth sensor No. 2:Bit 0 - sensor connected.Bits 1..7 - reserved	`1u`	All BT sensors
is3	Status of Bluetooth sensor No. 3:Bit 0 - sensor connected.Bits 1..7 - reserved	`1u`	All BT sensors
is4	Status of Bluetooth sensor No. 4:Bit 0 - sensor connected.Bits 1..7 - reserved	`1u`	All BT sensors

ID	Description	Type	Source
co1	Autoconductor, unique tag	`4u`	ACOND, ACOND2
co2	Autoconductor, counter on door No. 1 (IN)	`2u`	ACOND, ACOND2
сo3	Autoconductor, counter on door No. 1 (OUT)	`2u`	ACOND, ACOND2
co4	Autoconductor, counter on door No. 2 (IN)	`2u`	ACOND, ACOND2
co5	Autoconductor, counter on door No. 2 (OUT)	`2u`	ACOND, ACOND2
co6	Autoconductor, counter on door No. 3 (IN)	`2u`	ACOND, ACOND2
co7	Autoconductor, counter on door No. 3 (OUT)	`2u`	ACOND, ACOND2
co8	Autoconductor, counting door number	`1u`	ACOND, ACOND2
co9	Autoconductor, last counted IN	`2u`	ACOND, ACOND2
co10	Autoconductor, last counted OUT	`2u`	ACOND, ACOND2
co11	Autoconductor, video file time	`4u`	ACOND, ACOND2
co12	Autoconductor, sorting time	`4u`	ACOND, ACOND2
co13	Autoconductor, video file ID	`4u`	ACOND, ACOND2
co14	Autoconductor, video cameras status	`4b`	ACOND, ACOND2
co15	Autoconductor, error code	`1u`	ACOND, ACOND2
co16	Autoconductor, state:0 bit - enabled,1 bit - responses,2 bits - time synchronized,3-7 bits - reserve.	`1b`	ACOND, ACOND2
co17	Autoconductor, counter on door No. 4 (IN)	`2u`	ACOND2
co18	Autoconductor, counter on door No. 4 (OUT)	`2u`	ACOND2

ID	Description	Type	Source
ag1	Acceleration sensor 1, axis X 0.001g	`2s`	TESLiOT, ITALON
ag2	Acceleration sensor 1, axis Y 0.001g	`2s`	TESLiOT, ITALON
ag3	Acceleration sensor 1, axis Z 0.001g	`2s`	TESLiOT, ITALON

ag4	Acceleration sensor 2, axis X 0.001g	`2s`	TESLiOT, ITALON
ag5	Acceleration sensor 2, axis Y 0.001g	`2s`	TESLiOT, ITALON
ag6	Acceleration sensor 2, axis Z 0.001g	`2s`	TESLiOT, ITALON

ag7	Acceleration sensor 3, axis X 0.001g	`2s`	TESLiOT, ITALON
ag8	Acceleration sensor 3, axis Y 0.001g	`2s`	TESLiOT, ITALON
ag9	Acceleration sensor 3, axis Z 0.001g	`2s`	TESLiOT, ITALON

ag10	Acceleration sensor 4, axis X 0.001g	`2s`	TESLiOT, ITALON
ag11	Acceleration sensor 4, axis Y 0.001g	`2s`	TESLiOT, ITALON
ag12	Acceleration sensor 4, axis Z 0.001g	`2s`	TESLiOT, ITALON

ID	Description	Type	Source
hs1	Magnetic field level 1	`1u`	TESLiOT
hs2	Magnetic field level 2	`1u`	TESLiOT
hs3	Magnetic field level 3	`1u`	TESLiOT
hs4	Magnetic field level 4	`1u`	TESLiOT

ID	Description	Type	Source	Note
rc1	Status of section 1:Bit 0: AvailableBit 1:EnabledBit 2: Defrosting Bit 3: Pre-trip state	`1b`	DATA_COLD
rc2	Operation mode of section 1:0 – Disabled 1 – Heating2 – Cooling3 – No action4 – Defrosting5 – Pre-trip state15 – Unknown	`1u`	DATA_COLD
rc3	Status of section 2	`1b`	DATA_COLD
rc4	Operation mode of section 2	`1u`	DATA_COLD
rc5	Status of section 3	`1b`	DATA_COLD
rc6	Operation mode of section 3	`1u`	DATA_COLD
rc7	Communication status with unit:Bit 0: Unit connectedBit 1: Communication establishedBit 2: Unit supports TwoWayBit 3: Unit enabledBit 4: Communication errorBit 5: Data valid	`1b`	DATA_COLD
rc8	Fuel level, %	`1b`	DATA_COLD	0-100%
rc9	Actual values of digital sensors	`1b`	DATA_COLD	up to 8 sensors
rc10	Actual values of remote digital sensors	`1b`	DATA_COLD	bits 0-3, 4 sensors
rc11	Section 1: value of the supply air temperature sensor 1	`2s`	DATA_COLD CARRIER	10*ºC
rc12	Section 1: value of the supply air temperature sensor 2	`2s`	DATA_COLD	10*ºC
rc13	Section 1: value of the return air temperature sensor 1	`2s`	DATA_COLD CARRIER	10*ºC
rc14	Section 1: value of the return air temperature sensor 2	`2s`	DATA_COLD	10*ºC
rc15	Section 1: value of the evaporator temperature sensor	`2s`	DATA_COLD CARRIER	10*ºC
rc16	Section 2: value of the supply air temperature sensor 1	`2s`	DATA_COLD	10*ºC
rc17	Section 2: value of the supply air temperature sensor 2	`2s`	DATA_COLD	10*ºC
rc18	Section 2: value of the return air temperature sensor 1	`2s`	DATA_COLD	10*ºC
rc19	Section 2: value of the return air temperature sensor 2	`2s`	DATA_COLD	10*ºC
rc20	Section 2: value of the evaporator temperature sensor	`2s`	DATA_COLD	10*ºC
rc21	Section 3: value of the supply air temperature sensor 1	`2s`	DATA_COLD	10*ºC
rc22	Section 3: value of the supply air temperature sensor 2	`2s`	DATA_COLD	10*ºC
rc23	Section 3: value of the return air temperature sensor 1	`2s`	DATA_COLD	10*ºC
rc24	Section 3: value of the return air temperature sensor 2	`2s`	DATA_COLD	10*ºC
rc25	Section 3: value of the evaporator temperature sensor	`2s`	DATA_COLD	10*ºC
rc26	Actual value of analog sensor 1	`2s`	DATA_COLD
rc27	Actual value of analog sensor 2	`2s`	DATA_COLD
rc28	Actual value of analog sensor 3	`2s`	DATA_COLD
rc29	Actual value of analog sensor 4	`2s`	DATA_COLD
rc30	Actual value of analog sensor 5	`2s`	DATA_COLD
rc31	Actual value of analog sensor 6	`2s`	DATA_COLD
rc32	Value of remote analog sensor 1	`2s`	DATA_COLD
rc33	Value of remote analog sensor 2	`2s`	DATA_COLD
rc34	Value of remote analog sensor 3	`2s`	DATA_COLD
rc35	Idle time, hours	`4u`	DATA_COLD
rc36	Service time, hours	`4u`	DATA_COLD
rc37	Defrost Termination Temperature / Evaporator	`2s`	DATA_COLD CARRIER	10*C

ID	Description	Type	Source
cn1	Universal counter 1	`4u`	TELTONIKA_EYE
cn2	Universal counter 2	`4u`	TELTONIKA_EYE
cn3	Universal counter 3	`4u`	TELTONIKA_EYE
cn4	Universal counter 4	`4u`	TELTONIKA_EYE

ID	Description	Type	Source
ws1	Weight 1, kg	`2u`	MECH_DPS, MECH_DDS
ws2	Weight 2, kg	`2u`	MECH_DPS, MECH_DDS
ws3	Weight 3, kg	`2u`	MECH_DPS, MECH_DDS
ws4	Weight 4, kg	`2u`	MECH_DPS, MECH_DDS

ID	Description	Type	Source
wp1	Axle Load 1, %	`1u`	MECH_DPS, MECH_DDS
wp2	Axle Load 2, %	`1u`	MECH_DPS, MECH_DDS
wp3	Axle Load 3, %	`1u`	MECH_DPS, MECH_DDS
wp4	Axle Load 4, %	`1u`	MECH_DPS, MECH_DDS

ID	Description	Type	Source
in1	Digital Sensors 1	`1b`	ESCORT_TH
in2	Digital Sensors 2	`1b`	ESCORT_TH
in3	Digital Sensors 3	`1b`	ESCORT_TH
in4	Digital Sensors 4	`1b`	ESCORT_TH

ID	Description	Type	Source	Note
tm1	Current Touch Memory code	`4u`

ID	Description	Type	Source	Note
rf1	Current RFID code	`4u`

ID	Description	Type	Source	Note
ax1	Total axle load, 10 kg	`2u`	AXISLOAD	JSON field `tl`
ax2	Overall overload status 0 - no overload 1 - overload	`1u`	AXISLOAD	JSON field `to`
ax3	Axle 1 load, kg	`2u`	AXISLOAD	JSON field `tr.loads` If absent, the value is 0
ax4	Axle 2 load, kg	`2u`	AXISLOAD	JSON field `tr.loads` If absent, the value is 0
ax5	Axle 3 load, kg	`2u`	AXISLOAD	JSON field `tr.loads` If absent, the value is 0
ax6	Axle 4 load, kg	`2u`	AXISLOAD	JSON field `tr.loads` If absent, the value is 0
ax7	Axle 5 load, kg	`2u`	AXISLOAD	JSON field `ax.wt`
ax8	Axle 6 load, kg	`2u`	AXISLOAD	JSON field `ax.wt`
ax9	Axle 7 load, kg	`2u`	AXISLOAD	JSON field `ax.wt`
ax10	Axle 8 load, kg	`2u`	AXISLOAD	JSON field `ax.wt`
ax11	Axle 9 load, kg	`2u`	AXISLOAD	JSON field `ax.wt`
ax12	Axle 10 load, kg	`2u`	AXISLOAD	JSON field `ax.wt`
ax13	Axle 11 load, kg	`2u`	AXISLOAD	JSON field `ax.wt`
ax14	Overload flags bit 0 - axle `ax3` overloaded bit 1 - axle `ax4` overloaded ... bit 10 - axle `ax13` overloaded Possible values: 0 - no overload 1 - axle overloaded	`2b`	AXISLOAD	JSON field `ax.ow`
ax15	Lift axle flags bit 0 - axle `ax3` raised bit 1 - axle `ax4` raised ... bit 10 - axle `ax13` raised Possible values: 0 - axle lowered 1 - axle raised	`2b`	AXISLOAD	JSON field `ax.lf`

Value	Description	Alias
0x00	Not available	NONE
0x01	Gasoline/petrol	GAS
0x02	Methanol	METH
0x03	Ethanol	ETH
0x04	Diesel	DSL
0x05	Liquefied Petroleum Gas (LPG)	LPG
0x06	Compressed Natural Gas (CNG)	CNG
0x07	Propane	PROP
0x08	Battery/electric	ELEC
0x09	Bi-fuel vehicle using gasoline	BI_GAS
0x0A	Bi-fuel vehicle using methanol	BI_METH
0x0B	Bi-fuel vehicle using ethanol	BI_ETH
0x0C	Bi-fuel vehicle using LPG	BI_LPG
0x0D	Bi-fuel vehicle using CNG	BI_CNG
0x0E	Bi-fuel vehicle using propane	BI_PROP
0x0F	Bi-fuel vehicle using battery	BI_ELEC
0x10	Bi-fuel vehicle using battery and combustion engine	BI_MIX
0x11	Hybrid vehicle using gasoline engine	HYB_GAS
0x12	Hybrid vehicle using gasoline engine on ethanol	HYB_ETH
0x13	Hybrid vehicle using diesel engine	HYB_DSL
0x14	Hybrid vehicle using battery	HYB_ELEC
0x15	Hybrid vehicle using battery and combustion engine	HYB_MIX
0x16	Hybrid vehicle in regeneration mode	HYB_REG
0x17	Natural Gas (NG)	NG
0x18	Bi-fuel vehicle using NG	BI_NG
0x19	Bi-fuel using diesel	--
0x1A	Natural Gas (Compressed or Liquefied Natural Gas)	--
0x1B	Dual Fuel – Diesel and CNG	--
0x1C	Dual Fuel – Diesel and LNG	--
0x1D-0xFD	ISO/SAE reserved	--
0xFE	Error	--
0xFF	Not available (Parameter not supported)	--

¶ Notation

¶ Tables

¶ CAN. Standard Parameters

¶ CAN. Additional Parameters No. 1

¶ CAN. Additional Parameters No. 2

¶ CAN. Custom Parameters

¶ MODBUS. Custom Parameters

¶ Complex Events. Custom Parameters

¶ Bluetooth. Custom Parameters

¶ BLE. Angle Sensor

¶ BLE. Illuminance

¶ BLE. Battery Voltage

¶ BLE. Received Signal Strength (RSSI)

¶ BLE. Sensor Status

¶ BLE. Pressure

¶ BLE. Total Fuel Consumption

¶ BLE. Operating Time

¶ BLE. Sensor Communication Status

¶ Passenger Flow

¶ BLE. Acceleration

¶ BLE. Magnetic Field

¶ Refrigeration Unit

¶ BLE. Counter

¶ BLE. Weight

¶ BLE. Load

¶ BLE. Digital Sensors

¶ Current Touch Memory Code

¶ Current RFID Code

¶ Axle Loads

¶ Appendix

¶ FMS Fuel Types

¶ Retarder Modes