¶ General Information
The feature allows connecting the Axisload system, which transmits data in JSON format, to the device.
The device can receive the following data from the system:
- Total load
- Global overload flag
- Tractor axle loads (up to 4 axles)
- Trailer axle loads (up to 7 axles)
- Trailer axle overload flags
- Trailer axle lift flags
¶ Connection and Configuration
¶
- Configure the transmitted parameters
¶ Transmitted Data
The table below is valid if the device has been configured according to the example above.
| FLEX Field | Name | Description |
|---|---|---|
user_2u_1 |
Total Load | Total load on the trailer axles: 0 .. 65535 Resolution: 10 kg/bit |
user_1u_1 |
Total Overload | Global overload flag: 0 - Normal 1 - Overload |
user_2u_2 |
Axle 1 Load | Tractor axle load: 0 .. 65535 Resolution: 1 kg/bit |
user_2u_3 |
Axle 2 Load | See Axle 1 Load |
user_2u_4 |
Axle 3 Load | See Axle 1 Load |
user_2u_5 |
Axle 4 Load | See Axle 1 Load |
user_2u_6 |
Axle 5 Load | Trailer axle load: 0 .. 65535 Resolution: 1 kg/bit |
user_2u_7 |
Axle 6 Load | See Axle 5 Load |
user_2u_8 |
Axle 7 Load | See Axle 5 Load |
user_2u_9 |
Axle 8 Load | See Axle 5 Load |
user_2u_10 |
Axle 9 Load | See Axle 5 Load |
user_2u_11 |
Axle 10 Load | See Axle 5 Load |
user_2u_12 |
Axle 11 Load | See Axle 5 Load |
user_2u_13 |
Overload Flags | Overload flags: bit0 - Axle 1 bit1 - Axle 2 ... bit10 - Axle 11 Values: 0 - Normal 1 - Overload |
user_2u_14 |
Lift Axle Flags | Lift axle flags: bit0 - Axle 1 bit1 - Axle 2 ... bit10 - Axle 11 Values: 0 - Lowered 1 - Raised |