M:111 format message is used to respond to certain requests or commands via the SMS channel.
The main feature of the message is a standardized format that allows you to get basic information about the telemetry of the device at the time of the formation of this response.
M:111
R_A
14.15.59
02/05/23
G:0
I:NNNNNNNN
O:NNNN
AK:28.6 4.2
T:0.0 C
A:0.1 0.0
14.15.59
02/05/23
N050 57.0579
E043 47.5498
019
150
00480A40
M:111 - Message type.
<event> - Event alias.
Complete list of aliases and their descriptions are given in this guide.
HH.MM.SS - UTC event time.
DD/MM/YY - UTC event date.
G:X - Operating mode where X:
I:XXXXXXXX - State of the inputs when event was recorded. From IN1
to IN8 from left to right.
O:XXXX - State of the outputs when event was recorded. From O1
to O4 from left to right.
AK:XX.X YY.Y - Voltage at the inputs of the main (XX.X) and backup (YY.Y) power supply in volts.
T:ZXX - Temperature in degrees.
+ or -;AN:XX.X YY.YY - not used.
HH.MM.SS - Time of receipt of the last valid coordinates in UTC.
DD/MM/YY - Date of receipt of the last valid coordinates in UTC.
NXXX XX.XXXX - Latitude in degrees, minutes, and fractions of minutes.
EXXX XX.XXXX - Longitude in degrees, minutes and fractions of minutes.
XXX - Speed in km/h
XXX - Course in degrees (0 to 359).
hhhhhhhh - Record number in the internal memory (hexadecimal).