¶ General Information
For reliable data reception from the TESLiOT sensor, configure the sensor to transmit data every 10 seconds or more frequently. If a longer transmission interval is used, the device may occasionally miss sensor data under certain conditions.
¶ Configuration
Sensor identification is performed only by the MAC address.
Leave the Sensor Name field empty.
On the "Bluetooth" tab:
On the "Protocol Settings" tab:
Replace FF:FF:FF:FF:FF:FF in the command with the actual sensor MAC address.
Example for Sensor 1:
*!EDITS BLUETOOTH:GLOBAL(1),CHANNEL1(SENS),SENS1(7,FF:FF:FF:FF:FF:FF,!),US1(0),TS1(0,1),PROTOCOL:FLEX(30,&45[1]163[1]167[1]207[111]223[1]238[11]),USRPRM1(is1,sl1,ub1),USRPRM2(hs1),USRPRM4(st1,ls1)
Example for Sensor 2:
*!EDITS BLUETOOTH:GLOBAL(1),CHANNEL1(SENS),SENS2(7,FF:FF:FF:FF:FF:FF,!),US2(0),TS2(0,2),PROTOCOL:FLEX(30,&46[1]164[1]168[1]210[111]224[1]240[11]),USRPRM1(,,,is2,sl2,ub2),USRPRM2(,hs2),USRPRM4(,,st2,ls2)