¶ General Information
For reliable data reception from the TESLiOT sensor, configure the sensor to transmit data every 10 seconds or more frequently. If a longer transmission interval is used, the device may occasionally miss sensor data under certain conditions.
To transmit data from the TESLiOT multifunctional BLE sensor, use the Bluetooth Custom Sensor feature.
To configure the sensor, you need the TESLiOT BLE communication protocol specification. At the time this article was written, the manufacturer provided the packet structure shown below.
The latest packet structure can be requested from the manufacturer, TESLA SMART LLC:
https://tesla-smart.ru/
The example below uses several key parameters highlighted in the diagram:
¶ Configuration
Configuration template for the S-2435 device
To transmit the selected parameters, configure the device according to the template described below (all values are taken from the sensor documentation referenced above).
The sensor is identified only by its MAC address. Leave the Sensor Name field empty.
On the "Bluetooth" tab:
On the "Protocol Settings" tab:
¶ Verification in Wialon
