¶ V1.103.0
Firmware List Display Updated
- "Auto Update" Status Now Displayed Separately
- The "Release" Type Has Been Renamed to "Stable"
New Task Initiator Type: "System"
If You See "System" in the "Initiator" Column, the Task Was Generated Automatically (by the DRC System, Not a User or Operator)
Minor UI Improvements and Fixes
- Firmware Date Is Now Shown Along With the Version
- Column Layouts Updated in Some Tables
¶ v1.102.2
Added function to download SD card files from DRC
Previously, it was only possible to upload files to the account and then send them to the device's SD card.
Now, you can also download previously uploaded files (e.g., to review or edit their contents).
Optimized the file writing process to the device’s SD card
Adjusted response timeout settings and improved the logic for file overwriting on the SD card.
Fixed interface issues related to SD card file writing
- It was possible to schedule file writing to devices without an SD card.
- Tasks were incorrectly created from the SD card files page.
¶ v1.101.0
Added function to write files to the device's SD card
The function allows uploading a file to DRC and creating a task to send that file to the device’s SD card.
If a file with the same name and location already exists on the SD card, it will be overwritten.
¶ v1.100.0
Added display of current Complex Events program information
Only the name and version of the program are shown in the object table.
In the “Details” section of the device, the name, version, lock status, and type (BIN+SRC or BIN) are displayed.*
¶ v1.99.0
Added ability to upload custom CAN decoding files
A separate tab on the “CAN” page is now available for user decoding files.
Improved display of decoding file information
The object table and the “Details” section now show information about user decoding files (they are marked with [USER]).
Added SIM card identifier change history
The system tracks changes to ICCID and IMSI for each SIM card and logs any detected changes.
Added request for new diagnostic parameters
- Cellular network type
- Bluetooth connection status
- Current GSM signal strength (percentage)
Minor UI improvements
¶ v1.98.0
Added filters to task lists
Filters by type and status are now available on the “Objects” and “Task Groups” pages.
Added new parameters to the device “Details” section
For devices with the latest firmware, the system now displays information about the modem and navigation module firmware versions.
Added new option to the object list filter
A new “Within an hour” option has been added to the “Last connection time” filter.
Fixed CAN decoding file search by date
Fixed task status updates on the Task Groups page
Fixed highlighting of changes in diagnostic history
Corrected comparison of date/time fields in diagnostic data.
¶ v1.97.0
Added option to download XML configuration from a device
A new task type “Download XML Configuration” is available.
Current limitations for “Download XML Configuration” tasks:
➜ Group tasks are not supported
➜ Only one such task can be in queue (or in progress) per user (including all operators)
The downloaded configuration is saved under “XML Configurations”:
It can also be downloaded from the object’s task list in the task details window:
The system generates file names in the following format:
DRC_1_cfg_123456789012345_20241205124311.xml |
|
DRC |
constant |
1 |
user account ID |
cfg |
file content type |
123456789012345 |
device IMEI |
20241205124311 |
download timestamp in YYYYMMDDHHMMSS format |
Added support for S-451x devices
Updated “XML Configurations” section
- Added column showing each file’s size
- Added total size indicator and available limit for all user XML files
Fixed display of file upload percentage in task status
¶ v1.96.0
Enhanced object export functionality
Now it’s possible to export not only all objects, but also those manually selected (via flags) or by file (IMEI list).
Export of selected objects is limited to
180items
(due to browser limitations)
Minor localization fixes
¶ v1.95.0
New features added to the object import window
- Ability to update existing objects added
- Group selection for new objects moved to a separate tab
Only new objects will be added to the selected group. Existing ones will remain unchanged.
Updated user menu
- User ID is now shown in the menu
This will become the only place to find it in the future - Added “Security” menu
Currently includes password reset option
Fixed display of selected object count in task cancellation window
¶ v1.94.0
Added ability to select objects by IMEI from a file
You can now perform mass operations on objects by uploading an IMEI list file.
File requirements:
| File extension | .txt |
| Max file size | 1 MB |
¶ v1.93.0
Added "Task Groups" page
To improve task tracking, all tasks created for multiple objects are now automatically grouped.
Each group shows aggregated status statistics, updated every 5 minutes.
See how it works in this animation:
New filter option for object list
In the firmware date filter, a new option "Equals" has been added.
¶ v1.92.2
Added code version column to Complex Events program table
The system now checks compatibility of selected Complex Events programs with the device.
Added “Last Connection” column to object table
Sorting is available by this column.
Added collapse/expand button for the task list and object info panel
The panel collapses to a fixed size and expands to half the screen height.
Optimized flag-based object selection
Selected objects remain marked even when filter parameters are changed.
Fixed issue with loading ID list in a task
If the ID list was deleted after the task was created, the task will now end with “Execution Error” status instead of remaining “In Queue”.
Fixed object count calculation for mass task creation
An error occurred when selecting objects by filter with “All” selected for “Model” parameter.
Fixed removal of object group associations when enabling configuration request
This issue occurred when enabling configuration request from the configuration editor page.
¶ v1.92.1
Added Program Code Version Column to Complex Events Files Table
The system controls the compatibility of the selected Complex Events file with the device.
Added Last Connection Date Column to Objects Table
Sorting by this column is available.
Added "Collapse/Expand" Button for the Section with Task List and Object Details
The section collapses to a fixed size and expands to half the current height of the page.
Optimized Object Flagging Method
Objects now remain flagged even when filter parameters are changed.
Fixed Error in Loading Identifier List
If the identifier list was deleted after creating a task to load it, the task would complete with a status of Execution Error.
Fixed Calculation of Object Count for Creating Mass Tasks
When creating a task, the object count was incorrectly calculated if objects were flagged by filter and the Model parameter was set to All.
¶ v1.91.1
Revised interface for object information
Now the details of the selected object are displayed in the same section of the page as the object's tasks. The details are divided into logically grouped blocks. Switching between the display of details and tasks is done via tabs.
Added ICCID and IMSI Request for All Device SIM Cards
Each time the device connects, the system requests the current values of the SIM card identifiers. The retrieved values are displayed in the detailed information section of the device. Buttons to copy each identifier to the clipboard have also been added next to each identifier.
Added Diagnostic Information Request and Storage
Each time the device connects, the system requests diagnostic information from it. If the received information differs from the previously received information, a new record is created. The maximum number of records stored in the history is 100 (for each object).
For ease of diagnosis, changes in diagnostic data are highlighted.
Added Ability to Deselect All Marked Objects
Marks are removed from both manually marked objects and objects marked by filter.
Fixed Counting of Marked Objects
¶ v1.89.0
Device firmware update history added
Verification is performed upon each device connection as well as after successfully completing a firmware update task.
Maximum number of events saved in history is 100 (for each object).
Create Task button added to the quick actions list for each object
Now, to create a task for a single object, it is not necessary to select it with a checkbox.
Search field added in the task creation window
When opening the task creation window, there is now a search field available during the Item Selection stage.
Added ability to save a second phone number for the device
This affected the import and export procedures of devices.
A new template for importing devices has been uploaded to the DRC system (it can be downloaded in the object import window).
As a result of adding the second number, the layout of the object editing window has been modified:
Fixed the task group cancel function
Previously, deletion did not work for tasks that were in the process of execution.
¶ v1.88.0
Added function to upload lists with identifiers (TouchMemory key files).
The uploaded list can be sent to one or multiple devices.
Headers have been fixed in all tables used in the system.
¶ v1.87.0
In the table of user commands, commands can now be copied to the clipboard.
Added display of the number of selected objects in the bulk edit window.
Explanations for the checkboxes selecting editable settings have also been added.
Revised the task information display format, added the ability to copy the execution results.
Application language selection has been moved to the account profile window.
Object import and deletion buttons have been relocated to the menu. Additionally, the object export button has been moved there from the account menu.
All configuration template action buttons have been moved to the menu.
¶ v1.86.0
Hidden unused sections when viewing a configuration template.
Added indication of successful configuration template saving.
Changed appearance of the account menu button in the app header.
 |
| Account menu button |
Device models in drop-down lists are now divided by series.
 |
| New device list view |
Added command draft for setting up DRC.
Command to configure device to work with the current DRC account is displayed in the windows for creating and importing objects.
Updated appearance of the dialog box to remove any items.
Name of the uploaded file is used as the name of the XML configuration.
Now the name of the uploaded XML configuration cannot be edited. Instead, the name of the uploaded file is used.
Length of the file name must not exceed 100 characters.
¶ v1.83.1
Added ability to view an existing template on the Configuration Templates page.
Added ability to create a copy of an existing template on the Configuration Templates page.
This mechanism can be used to create multiple templates with minor differences, or to edit an existing template. To edit a template, create a copy of it, make changes, and delete the old one.
Added link to DRC History of Changes on login page.
If you click on the DRC version (under the authorization window), wiki page with the history of changes to the DRC system will open.
Fixed a bug with loading CE files into the system.
¶ v1.82.1
Added disclaimer for CAN decoding files
We have ddded a reminder that the presence of a CAN decoding file with any validation status does not guarantee that data will be received from the vehicle's CAN bus.
Regrouped settings in Device Configuration Editor to match NTC Configurator
Section names now correspond to the names of NTC Configurator program tabs.
Added ability to create a configuration template on the Configuration Templates page
Previously, a template could only be created on the configuration editor page of a device.
Added device model column to configuration template tables
Now you can see on which device model the configuration template is based on. Sometimes this can be important, because not all device models contain a complete set of settings.
Added ability to load Complex Events programs with .cex extension
Programs with the .cex extension do not contain a graphic part. Such a program cannot be edited or its structure studied.
Added column with content type to the Complex Events program table
Now it displays what is included in the Complex Events program:
BIN - only the executable part (.cex files);
BIN+SRC - executable part and graphical part (.ceb files).
Added column with reading protection flag to the Complex Events program table
Program with reading protection flag will not be able to be downloaded from the device.
Set correct maximum device password length in the object settings window
Previously, 30 characters could be entered in the window, but now only 15.