¶ Description
NTC Control mobile application is designed for operational diagnostics and basic configuration of devices manufactured by Navtelecom.
NTC Control allows to connect to devices and operate with them at short and long distances.
¶ Features:
- real time telemetry displaying;
- uploading the TMI file (data from the non-volatile memory) from the device;
- sending uploaded telemetry to the server from a smartphone;
- setting up a basic set of parameters for device control;
- time synchronization;
- device firmware update;
- sending standard and custom commands to the device;
- downloading information from the SD card installed in the device.
¶ Application operates with following devices:
- START S-20xx;
- SMART S-24xx, S-45xx;
- SIGNAL S-26xx, S-46xx, S-47xx.
¶ How connect to the tracker?
- Bluetooth
(some device models are not equipped with a Bluetooth module, for example S-2654) - Internet
- USB
(smartphone must support the USB-Host function and you also should use special OTG cable for connection)
To connect with Bluetooth, you must give the application access to determine the location of your smartphone and enable location in Android settings (at least while you are working with the application).
¶ Download
Link to the app in Play Store
We will greatly appreciate if you give us some feedback on working with the application. Your opinion is very important to us!
In case of problems, please contact Navtelecom Support Team